GP Injection pumps
GP pumps - rational solution of any problems associated with injection work: ground anchors installation, injection piles installation, cementation in tunnels, slope stabilization.
Injection pump GP 60 has the following characteristics:
- Dimensions 860 x 585 x 1630 mm
- Weight 370 kg
- Number of plungers-2
- Max. pressure 7 MPa, max. flow 60 l/min.
- High capacity of solution supply
- Compact design for all conditions of the construction site
- Available supplies
- Quick maintenance
- Large service resource
Injection pump GP 40 has the following characteristics:
- Dimensions 860 x 585 x 1630 mm
- Weight 370 kg
- Number of plungers-1
- Max. pressure 10 MPa, max. flow 40 l/min.
- Effective combination of flow and pressure
- Compact design for all conditions of the construction site
- Available supplies
- Quick maintenance
- Large service resource
.jpg)
GP 40 Injection pump with pneumatic drive has the following characteristics:
- Effective combination of flow and pressure
- Compact design for all conditions of the construction site
- The ability to operate in hazardous areas gas and dust
- Available supplies
- Quick maintenance
- Large service resource
PARAMETERS CONTINUOUS ADJUSTMENT
Hydraulic circuit of GP pumps provides smooth adjustment of solution flow rate and discharge pressure.
